上海沃第森电子科技有限公司

Wdsen Electronic Technology Co., Ltd

iButton配件

DS9107 iButton Capsule 防护套

iButton防护套是一个用来保护温度记录器iButton (DS1921及DS1922系列)的机械外套,起到防潮、防溶解和防压的作用。器件提供为iButton内部提供IP68保护等级。保护等级超过“ATM防水3级”要求。
原装防护套

应用/使用

  • 高压灭菌器
  • 饮料生产流程监视
  • 科学研究
  • 海水温度监测

 

DS9093F Key Fob, Flanged 挂件

DS9093SPlastic Plate Mount 固定件

DS9093F挂件用于对iButton DS1921/DS1922L /DS1923的 固定支架,方便 记录仪的固定和 读取数据 。

DS9093S用于iButton DS1921/DS1922L /DS1923的墙面固定,用于固定式温湿度记录仪安放

 

 

 

 

 

 

 

 

 

 

 

DS9096P Adhesive Pads 贴片

概述

The DS9096P is a made of white, double-coated acrylic VHB™ foam tape (3M part number 4932) that is die-cut to match the diameter of iButton® devices. The pads allow iButtons to be attached to virtually any smooth surface. The DS9096P offers an excellent long-term holding power for use in many interior and exterior industrial applications.

The DS9096P works best on low surface energy substrates, including most metal, sealed wood and glass, as well as many plastics, composites, and painted surfaces. Porous (e.g., concrete) or fiberous materials (e.g., wood) will require sealing to provide a unified surface. Materials such as copper, brass, plasticized vinyl may require priming or coating to prevent interaction between adhesive and substrate. Bonding to glass, ceramic tile or other hydrophilic surfaces in a high humidity environment may require the use of a silane coupling-agent to help ensure a long-term bond. Rough surfaces created by light abrasion may actually be detrimental to bond strength.

Before applying the DS9096P, clean the surface of the objects thoroughly with a mixture of 50% isopropyl alcohol and 50% water and wipe it dry. Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesion contact and thus improves bond strength. For good surface contact apply enough pressure to ensure that the tape experiences approximately 15psi (100kPa). Typically, uniform thumb pressure on the iButton will achieve the desired result. At room temperature approximately 50% of the ultimate bonding strength is achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours.

关键特性

  • Low-cost permanent attachment method for iButton
  • Readily attaches iButton to any smooth flat surface
  • Available in die-cut rolls of 500/roll with a core inner diameter of 76mm (3in)
  • Excellent U.V. resistance in outdoor weathering tests and weather-o-meter tests
  • 24 months shelf life at 21°C and 50% relative humidity
  • Ideal application temperature 21°C to 38°C; minimum application temperature 10°C; maximum long term temperature 71°C

 

温度记录器
iButton DS1921G - Thermochron® iButton -40°C至+85°C
概述 快速浏览
iButton DS1921H - 高分辨率Thermochron - (体温范围)
概述 快速浏览
iButton DS1922E - 8KB记录存储器,带有15C至140C温度范围
概述 快速浏览
高容量温度记录器
iButton DS1922L - 8KB记录存储器,带有-40°C至+85°C温度范围
概述 快速浏览
iButton DS1922T - 8KB记录存储器,带有0°C至125°C温度范围
概述 快速浏览
湿度记录仪
iButton DS1923 - 温度及湿度记录仪:0至100% RH和-20°C至+85°C
概述 快速浏览

 

24小时在线客服

24小时在线咨询

24小时在线咨询

About Us | 友情链接| ©2003 WDSEN v1.0