iButton Temperature Loggers DS1921G DS1922 DS1923

DS1921H High-Resolution Thermochron iButton Devices

iButton Data Loggers

Description

The Thermochron® iButton® devices (DS1921H/Z) are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate, both as a direct storage of temperature values as well as in the form of a histogram. Up to 2048 temperature values taken at equidistant intervals ranging from 1 to 255 minutes can be stored. The histogram provides 64 data bins with a resolution of 0.5°C. If the temperature leaves a user-programmable range, the DS1921H/Z will also record when this happened, for how long the temperature stayed outside the permitted range, and if the temperature was too high or too low. Additional 512 bytes of general-purpose battery-backed SRAM allow storing information pertaining to the object to which the DS1921H/Z is associated. Data is transferred serially via the 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1921H/Z is factory-lasered with a guaranteed unique electrically readable 64-bit registration number that allows for absolute traceability. The durable stainless steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1921H/Z to be mounted on almost any object, including containers, pallets, and bags.

Key Features

• Digital thermometer measures temperature 1/8°C increments with ±1°C accuracy
• Built-in real-time clock (RTC) and timer has accuracy of ±2 minutes per month from 0°C to 45°C
• Water resistant or waterproof if placed inside DS9107 iButton capsule (Exceeds Water Resistant 3 ATM requirements)
• Automatically wakes up and measures temperature at user-programmable intervals from 1 to 255 minutes
• Logs consecutive temperature measurements in 2KB of datalog memory
• Records a long-term temperature histogram with 1/2°C resolution
• Programmable temperature-high and temperature-low alarm trip points
• Records up to 24 time stamps and durations when temperature leaves the range specified by the trip points
• 512 bytes of general-purpose battery-backed SRAM
• Communicates to host with a single digital signal at 15.4kbits or 125kbits per second using 1-Wire protocol
• Fixed range: H: +15°C to +46°C; Z: -5°C to +26°C

Common iButton Features

• Digital identification and information by momentary contact
• Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
• Multidrop controller for 1-Wire net
• Chip-based data carrier compactly stores information
• Data can be accessed while affixed to object
• Button shape is self-aligning with cup-shaped probes
• Durable stainless steel case engraved with registration number withstands harsh environments
• Easily affixed with self-stick adhesive backing, latched by its flange, or locked with a ring pressed onto its rim
• Presence detector acknowledges when reader first applies voltage

DS1921G Thermochron iButton Device

DS1921H High-Resolution Thermochron iButton Devices

DS1921Z High-Resolution Thermochron iButton Devices

DS1922E iButton High-Temperature Logger with 8KB Data-Log Memory

DS1922L iButton Temperature Loggers with 8KB Data-Log Memory

DS1922T iButton Temperature Loggers with 8KB Data-Log Memory

DS1923 iButton Hygrochron Temperature/Humidity Logger with 8KB Data-Log Memory

DS1925 iButton High-Density Temperature Logger with 122KB Data-Log Memory

DS9097U-S09 Universal 1-Wire COM Port Adapter

DS1402D-DR8 1-Wire Network Cables